FXR FXR 155Z SE (Special Edition) with F2 Twin Spar design (45% stronger than traditional SDG frame) and DNM MTG-RC fully adjustable (360mm length, extra 60mm travel), you will thrash any other Pittys
The FMX (short for Forza Motocross) pit bike was officially introduced to the New Zealand market in July 2008. The, FMX50, FMX70, FMX125L, FMX125, FMX140, FMX140 Big Foot, FXR155Z,FXR155Z SEhave each been released to meet different groups of customers’ needs. Our FMX pit bike series is a great fit especially for active kids, teenagers and adults who love outdoor activities.
The most important advantages of FMX pit bikes are their amazing performance as well as their very affordable price. All FMX pit bikes are designed in Australia and manufactured at one of the top pit bike factories in Asia. FMX pit bikes use top-level world-class parts (Please refer to the specifictions of each model for accuracy).
· Lifan/Zongshen/Forza Engine (Lifan/Zongshen has become one of the biggest motorcycle manufacturers in the world)
· Mikuni Carb (Japanese No.1 Carb) or KF Carb (Japanese standard)
· NGK spark
· CNC/Alloy components
· KMC 420/428 racing chain (Taiwan)
Considering the quality of the parts used, our prices will surprise you. Our promise: FMX pit bikes are the best value for their price range.
(Please see our customers’ testimonials)
The bike is in box andabout 90% assembled.Assemblyis available on request. Assembly fee applies.
How to set up a bike:
This bike requires minor assembly work which takes about 0.5-1 hour.Assembly work requires installing front wheels, front handle bars, check engine oil and bolts & nuts. (Please see “Installation Guidance” section)
All new bikes require run-in, please consult with seller about the procedure if you are not clear. You must replace the initial transport type of oil with proper motorcycle oil before you use the bike. Our recommended engine oil type is 10W/40 4 stroke motorcycle engine oil. Run-in period is about 4 hours / first 3 tank of petrol. During this period, do not over-rev the engine and do not drop the clutch. In the meantime, riders need to check all the bolts and nuts, chain tensioning during the run-in. (Not proper run-in can cause gear slipping).You need to check and tighten all the spokes after 1st 15mins, then check again in 1-2hours (Due to spokes are settled in and loosed in the initial period)
Before riding a bike:
It is compulsory to wear safety gear when riding any off-road bikes. Compulsory safety gears includes a helmet (must be legally approved). You may wear gloves, knee and elbow protectors etc as selective safety gears. You may contact us on 09-2738883 or email to firstname.lastname@example.org for accessories enquiry.
How to maintain a bike:
1) Regular service is very important to a pit bike. We recommend customers need to service their bike every 6 riding hours / 3 months (whichever comes first).
2) Do warm up the bike for a couple of minutes prior to every ride. (Warm-up instruction: open up the choke when you start the bike, accelerate the thumb throttle a little bit for a minute then close the choke after the engine has been warmed up)
3) Do not clean the bike by using hose / water blaster (recommend to use a cloth to mop).
We are not responsible for any injury or death arising from the use of this motorcycle. This motorcycle is designed for off-road use only and must be operated in accordance with all relevant laws and regulations. It’s rider’s responsibility to find out and be aware of all relevant law and regulation during the operation of the bike. While all care is taken, any errors and or omissions in the item details are unintentional. Therefore, NZ Motor Factory Ltd does not hold liability for any errors or omissions on this listing.